KTM 125 Duke 2017 Onwards. KTM 790 Duke 2018 Onwards. Street Triple 765 2017 Onwards. 1200 Tiger 2018 Onwards. Powder Black, stainless steel round road legal exhaust with removable baffle. Please state if your bike has a lambda/02 sensor when ordering. Includes link pipe, hanging strap and clamp. HAWK Exhausts is the latest addition to the Pipe Werx Range. Built&#######xA0;to the same&#######xA0;high standards as the Pipe Werx range, &#######xA0;using a more cost effective outlet, this allows us to offer amazing value to the customer. Hand built in the UK using only the finest materials. Supplied with all necassary fittings. Fully road legal and conforms to BSAU standards with the baffle in place. No need to re-jet/re-fuel. We aim to dispatch within 48 hours. For more details etc. Pipe Werx Bikes are Manufacturers of High Quality Aftermarket Motorcycle Exhausts. We specialise in link pipes and Exhaust Silencers and associated performance products. Catering for over 300 models and focussing on High Quality Silencers and products. Standard bolt on fitments are available where applicable depending on the model of the Motorbike. Our aftermarket motorcycle exhausts are designed and built to give a fantastic look and Sound in addition to maximum power without the need to re-map or re-jet on Street Legal Applications, race fitments may need a re-map or re-jet depending on the current set-up. All of our motorcycle exhausts are built in-house to the highest quality with grade 304 stainless steel internals, the highest grade wadding and gas tight rivets. All backed by our lifetime guarantee against manufacturing defects, you can be certain that our exhaust products will enhance the visual and sound appeal of your motorcycle, without compromising performance. Pipe Werx Exhausts are the Performance Exhaust of Choice. Does the exhaust come with a can hanging strap? Yes the exhaust comes with a hanging strap and all necessary fittings required. Does the exhaust come with link pipe? Yes if your bike exhaust is not a bolt-on and requires a link pipe the link pipe is included. What if my exhaust is a bolt-on fitment? If your exhaust has the manufacturers bolt on fitment we will supply your exhaust with the correct bolt-on fitment to fit your standard fitting on your header/link pipe. What is the exhaust length? The sleeve length of our standard exhaust is 380mm, on the GP3 its 300mm and the Hawk GP is 250mm. We can make our standard diameter exhaust up to 450mm in length at no extra charge. Some of our street legal exhausts are 450mm in length due to the silencing required on some motorbikes. Is the exhaust road legal? Yes, all of our Exhausts that are deemed as street legal in the description have the BSAU stamped markings and come with a removable db killer for road legal use in the UK and will pass an M. T in road legal form with the baffle (db killer) in place. Can I have a stubby or longer exhaust? This depends a lot on the model of bike, our’SL’ range with the db killer fitted still gives a deep sporty note while staying under the legal limit. This noise level is increased to race/trackday level when the db killer is removed, and the GP3 is just full blown race with no noise restrictions!!! (please note trackday and even race meetings are getting stricter and stricter, so it’s always advisable to have a db killer just in case). The decibel level can vary from bike to bike, exhausts are designed to silence the exhaust gases from the engine. The longer the exhaust the more silencing that it will do as there is more physical volume inside the exhaust to silence the gases from the engine. With trackday noise restrictions becoming more strict we would not recommend any of our race exhausts for use on track and we are unable to guarantee the noise level that your exhaust will give out as bikes do vary. Please ask our advice if you’re thinking of taking your bike on a track. Can I fit a db killer (baffle) to a Race or GP3 Exhaust? Yes you can, please just state when ordering your exhaust model and add the DB killer to your basket before checkout. Return post is at the buyers expense unless we have made a mistake. If we’ve made a mistake or there is something that you’re not happy with, let us know, we are human and will do everything we can to rectify the situation. Even if you have made a mistake and something needs exchanging, again let us know and we will do everything we can to help. Add to Favourite Sellers. Sign up to Newsletter. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Honda CBR 600 F 2001-2008 Hawk Black Round Exhaust Can” is in sale since Saturday, December 4, 2010. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “pipe.werx.bikes” and is located in Ormskirk. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.
- Type: Exhaust System & Parts
- Sub-Type: Exhaust Silencer
- Manufacturer: Honda
- Intended Use: Modification/ Enhancement
- Manufacturer Part Number: Does Not Apply
- Brand: Pipe Werx