NEW YSS Emulsion Shock Absorber. Honda CBR600 F/F2 1991 – 1994. M = Rear monoshock. Z = Emulsion Gas. 506 = 50 x 16mm Gas. 295 = length in mm (adj 290-300). T = Threaded pre-load. R = Rebound Adjustable. L = Length Adjustable. Will also fit others. The item “YSS Shock Absorber for Honda
Penske 8987 Triple Clicker rear shock for CBR600F4/F4i. Please read entire description. Careful review of receipts indicate this is for a CBR600F4 or F4i based on its dimensions and spring size. Upper eyelet width: 28.5mm. Lower eyelet width: 39mm. Overall appears to be in excellent working condition. The choice for pro racers and serious trackday
A very rare factory issue shock absorber hence the bronze coloured shock body, with the specification including Adjustable rebound damping with adjuster wheel above the end eye, Adjustable compression damping, Adjustable length on the end eye and Integrated hydraulic spring preload adjuster hexagon on the adjuster. This was set up for a rider weighing 13
This was removed from a Ten Kate prepared 2001 CBR 600 F4i which had a massive spec including a full Titanium Akrapovic system which Ill be listing later. Very rare factory issue shock absorber with the specification including Adjustable rebound damping with adjuster wheel above the end eye, Adjustable compression damping, Adjustable length on the
Removed from the very well maintained 2001’Y’ reg Honda CBR 600 F4I shown. The bike had an indicated 52118 Kms on the clock, and was running well prior to dismantling (the actual bike is shown, and a short video of the bike running can be viewed below)………. In clean overall condition with no leakage evident.
Honda CBR600 F4 Carb model / My ref (281). Fits all Carb model CBR600 F4 years 1999 & 2000. Mileage of donor bike : 25,646 miles, (VOSA verified). In great condition and perfect working order. Has perfect damping action. The adjusters move freely and are functional. Removed from a very tidy / well maintained road
FEATURES: Threaded Spring Preload – Rebound Adjustment – Length Adjustment. YSS is the largest producer of after market motorcycle shock absorbers in the world, and its range is constantly expanding. With a 270 strong team, they manufacture over 2 million shocks per year, with a plethora of products to suit all tastes and budgets. Since
This listing is for a used Hagon rear shock absorber to suit a Honda CBR600F FX , FY , F1, F2 , F3. Hagon part number is M61054. There are marks on the Lock nut where the Pre Load has been adjusted. Length between fixings centres: 310mm. Fixing holes are to suit M10. Top bush
Honda CBR600 F4i Maxton Rear Shock. This was removed from a 2002 high spec race bike, its overall condition is good. The adjuster turns freely and works as it should. This will fit F4i models from 2001 to 2006. It does have a few age related marks and cracks to the paint on the spring
Fully adjustable for preload, rebound and compression damping. All adjusters operate smoothly and freely. All of our parts are checked and validated for integrity, trueness/straightness and functionality. All of our items are wrapped in bubble wrap and labelled immediately after photographing, we guarantee you receive your item exactly as pictured, without any additional marks, scratches,